-- This is a common MIB for KX G1 and G2 traps

-- 12/20/10 H. Gonzalez
-- notifications updated
-- Added new traps for scanStarted, scanStopped
-- Also added defn for portList 

-- 03/09/10 H. Gonzalez
-- notifications updated
-- Added new traps for securityBannerChanged, securityBannerAction
-- Also added defn for bannerChanges, bannerAction

-- 09/08/09 H. Gonzalez
-- notifications updated
-- Added new traps for setDateTime, setFIPSMode
-- Also added defn for sysDateAndTime, fipsModeStatus 

-- 10/14/08 H. Gonzalez
-- notifications updated 
-- Added new traps for userForcedLogout, userUploadedCertificate
-- and bladeChassisCommError 
-- Also added defn for certificateAuthorityName

-- 03/05/2008 H. Gonzalez
-- notifications updated 
--    provide additional support of notifications
--    containing both IPv4 and IPv6 addresses

-- Authors: Prasanna Nageswar and Sujata Osowski

-- 01/15/2007 Sujata Osowski
-- restructured KX2.0 MIB to pass level 6 validation
--    Import section is revised
--    Module Identity section is revised
--    Conformance information is added towards the end
--    Renamed some ASN variables i.e. objectName -> rcpObjectName etc.
-- Added 2 new traps for ipConflictDetected and ipConflictResolved
-- Also added defn for count, new trap variable


RemoteKVMDevice-MIB DEFINITIONS ::= BEGIN
	IMPORTS
                MODULE-IDENTITY, NOTIFICATION-TYPE,
		enterprises, Integer32
                         FROM SNMPv2-SMI
                
		OBJECT-TYPE
			 FROM RFC-1212

		DisplayString, DateAndTime
			 FROM SNMPv2-TC

                MODULE-COMPLIANCE,
                NOTIFICATION-GROUP,
                OBJECT-GROUP        
                         FROM SNMPv2-CONF;	

-- Raritan is registered with IANA for an enterprise MIB 

raritan MODULE-IDENTITY
	LAST-UPDATED "200701151200Z"
	ORGANIZATION "Raritan Inc."
	CONTACT-INFO
		 "	Technical Support	
			Raritan Inc.
			400 Cottontail Lane
			Somerset, New Jersey, 08873
			E-mail: support@raritan.com"
	DESCRIPTION
        "The MIB module representing Raritan Computers'
        implementation of enterprise specific MIBs
        for KX products."

    	REVISION "200701151200Z"
    	DESCRIPTION
        "The initial version of common KX MIB module."
	::= { enterprises 13742 }

remoteKVMDevice OBJECT IDENTIFIER ::= { raritan 3 }

-- GW same location as TRAPS (implied remoteKVMDevice#) so that it is compatible with the previous MIB.

remoteKVMDeviceNotifications OBJECT IDENTIFIER ::= { remoteKVMDevice 0 }

-- We will define Get and trap objects
-- image Version is a Get Operation
-- objectimageCurrentVersion is subtree 1 of the remoteKVMDevice  mib
--
-- Set MIB Managed Objects can be added to this 

-- BEGIN DEFINITION OF GET OBJECTS

rcpObjectProductVersion OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
    	 "The product version currently running"
    ::= { remoteKVMDevice 1 } 

-- Define all the Trap ASN variables

rcpObjectName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The model type of the device"
    ::= { remoteKVMDevice 2 }

rcpObjectInstance OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The device name"
    ::= { remoteKVMDevice 3}

userName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "User Name"
    ::= { remoteKVMDevice 4}

targetUser OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The user record being operated on"
    ::= { remoteKVMDevice 5}

groupName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The group record being operated on"
    ::= { remoteKVMDevice 6}

rcpIPAddress OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The IP address"
    ::= { remoteKVMDevice 7}

deviceName  OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "Device name"
    ::= { remoteKVMDevice 8 }		   

portStatus OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "Port status (0-Unavailable, 1-Available and 2-Busy)"         
    ::= { remoteKVMDevice 9 }		   

portName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "Port Name"         
    ::= { remoteKVMDevice 10 }		   

clusterID OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The cluster ID of the CommandCenter managing this device"         
    ::= { remoteKVMDevice 11 }		   

ipPort OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "The IP Port"         
    ::= { remoteKVMDevice 12 }   

resetType OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "How the device reset was performed"         
    ::= { remoteKVMDevice 13 }		   

interface OBJECT-TYPE
    SYNTAX	INTEGER { lan(1), modem(2) }
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	 "Interface type"
    ::= { remoteKVMDevice 14}

ethernetInterface OBJECT-TYPE
    SYNTAX	INTEGER { lan0(0), lan1(1)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION   
    	"Ethernet Interface"
    ::= {  remoteKVMDevice 15 } 

backupRestoreAction  OBJECT-TYPE
    SYNTAX	INTEGER { backup(0), restore(1) }
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	"Backup Restore Action."
    ::= {  remoteKVMDevice 16 }

imageType OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS   read-write
    STATUS current
    DESCRIPTION
         "Image type to update."
    ::= { remoteKVMDevice 17 }


imageVersion OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
         "The version of the Upgrade image"
    ::= { remoteKVMDevice 18 }		   

status OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
        "The success status of an operation"
    ::= { remoteKVMDevice 19 }		   

fileVersion OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
         "The file version"
    ::= { remoteKVMDevice 20 }		   

fileType OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
         "The file type"
    ::= { remoteKVMDevice 21 }		   
                                         
outletName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	    "Name of the power outlet."
    ::= { remoteKVMDevice 22 }		


portNumber OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	 "Port number"
    ::= { remoteKVMDevice 23}

serialNumber OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	 "Serial Number of the Device or CIM"
    ::= { remoteKVMDevice 24}

cimName OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	    "Name of the cim."
    ::= { remoteKVMDevice 25 }	

count OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	 "A generic counter"
    ::= { remoteKVMDevice 26}	

restoredLanPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Lan port restored after the failure"
    ::= { remoteKVMDevice 27 }
   
remoteIpAddress OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The IP address of a client"
    ::= { remoteKVMDevice 28}

oldIpAddress OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The IP address"
    ::= { remoteKVMDevice 29}

newIpAddress OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The IP address"
    ::= { remoteKVMDevice 30}

newNetmask OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The net mask "
    ::= { remoteKVMDevice 31}

oldNetmask OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The net mask"
    ::= { remoteKVMDevice 32}

oldGateway OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The Gateway ip"
    ::= { remoteKVMDevice 33}

newGateway OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The Gateway ip"
    ::= { remoteKVMDevice 34}


-- KSX G2 specific var Names sxAlertString, pduName

sxAlertString OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		" Serial Alert string on a port. "
	::= { remoteKVMDevice 38 }

pduName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		" Name of the connected PDU "
	::= { remoteKVMDevice 39 }


   
changeEventText OBJECT-TYPE
    SYNTAX              DisplayString
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION         "A configurable parameter was changed.  The
description text identifies the object changed and its new value.  The format
of the text is 'IPv 4 Parameter : parameter = new value, . IPv6 Parameter :
parameter = new value, ..."
    ::= { remoteKVMDevice 40 }

certificateAuthorityName  OBJECT-TYPE
   SYNTAX       DisplayString
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
     "Certificate Authority Name"
   ::= { remoteKVMDevice 41 } 

sysDateAndTime  OBJECT-TYPE
   SYNTAX       DateAndTime
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION  
     "The system date and time."
   ::= { remoteKVMDevice 42 }

fipsModeStatus OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
    	 "FIPS Mode status (0-Disabled, 1-Enabled)"         
    ::= { remoteKVMDevice 43 }

bannerChanges  OBJECT-TYPE
    SYNTAX      INTEGER {enabled(0), disabled(1), modified(2)}
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "KX2 Banner Changes "
    ::= { remoteKVMDevice 44 }

bannerAction   OBJECT-TYPE
    SYNTAX     INTEGER {declined(0), accepted(1)}
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION  
         "User Acceptance / Rejection of Initial Banner Consent"
   ::= {  remoteKVMDevice 45 }

portList OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (1..1024))
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Port List" 
	::= { remoteKVMDevice 46 }

                       
-- Start the Traps 

rebootStarted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName		
    }
    STATUS	current
    DESCRIPTION
		    "The reboot process has started"
    ::= { remoteKVMDeviceNotifications 1 }


rebootCompleted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance
    }
    STATUS current
    DESCRIPTION
	"The reboot process is complete"
    ::= { remoteKVMDeviceNotifications 2 }


userLogin NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current	 
    DESCRIPTION
	"A user logged in"
    ::= { remoteKVMDeviceNotifications 3 }


userLogout NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"A user logged out"
    ::= { remoteKVMDeviceNotifications 4 }


userAuthenticationFailure NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"A user authentication attempt failed"
    ::= { remoteKVMDeviceNotifications 5 }


portConnect NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	portName
    }
    STATUS current
    DESCRIPTION	
	"A user connected to a port"
    ::= { remoteKVMDeviceNotifications 6 }


portDisconnect	NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	portName
	}
    STATUS current
    DESCRIPTION	
	"A user disconnected from a port"
    ::= { remoteKVMDeviceNotifications 7 }


userSessionTimeout NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION	
	"A user timed out from the device"
    ::= { remoteKVMDeviceNotifications 8 }


userConnectionLost NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION	
	"A user lost connection to the device"
    ::= { remoteKVMDeviceNotifications 9 }


portStatusChange NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	deviceName,
	portName,
	portStatus
    }
    STATUS current
    DESCRIPTION	
	"A port has become unavailable"
    ::= { remoteKVMDeviceNotifications 10 }

userAdded NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName, 
	targetUser
    }
    STATUS current
    DESCRIPTION
	"A user was added to the system"
    ::= { remoteKVMDeviceNotifications 11 }

userModified NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	targetUser
    }
    STATUS current		 
    DESCRIPTION
	"A user account was modified"
    ::= { remoteKVMDeviceNotifications 12 }

userDeleted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	targetUser
    }
    STATUS current
    DESCRIPTION
	"A user was deleted from the system"
    ::= { remoteKVMDeviceNotifications 13 }

groupAdded NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	groupName
    }
    STATUS current
    DESCRIPTION
	"A group was added to the system"
    ::= { remoteKVMDeviceNotifications 14 }


groupModified NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	groupName
    }
    STATUS current		 
    DESCRIPTION
	"A group was modified"
    ::= { remoteKVMDeviceNotifications 15 }


groupDeleted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	groupName
    }
    STATUS current
    DESCRIPTION
	"A group was deleted from the system"
    ::= { remoteKVMDeviceNotifications 16 }

startCCManagement NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION	
	"The device was put under CommandCenter management"
    ::= { remoteKVMDeviceNotifications 17 }

stopCCManagement NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION	
	"The device was removed from CommandCenter management"
    ::= { remoteKVMDeviceNotifications 18 }

factoryReset NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"The device was reset to factory default setting"
    ::= { remoteKVMDeviceNotifications 19 }

deviceUpdateStarted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress,
	imageVersion
    }
    STATUS current
    DESCRIPTION
	"The device update has started"
    ::= { remoteKVMDeviceNotifications 20 }

deviceUpdateCompleted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress,
	imageVersion,
	status			
    }
    STATUS current
    DESCRIPTION
	"The device update is complete"
    ::= { remoteKVMDeviceNotifications 21 }

configBackup NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress,
	fileType,
	fileVersion,
	status
    }
    STATUS current
    DESCRIPTION
	"The device configuration has been backed up"
    ::= { remoteKVMDeviceNotifications 22 }

configRestore NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress,
	fileType,
	fileVersion,
	status
    }
    STATUS current
    DESCRIPTION
	"The device configuration has been restored"
    ::= { remoteKVMDeviceNotifications 23 }

userPasswordChanged NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName, 
	targetUser,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"A user password was changed" 
    ::= { remoteKVMDeviceNotifications 24 }

powerNotification NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	outletName,
	status
    }
    STATUS current
    DESCRIPTION
	"The power outlet status (1-Active or 0-Inactive) notification "
    ::= { remoteKVMDeviceNotifications 25 }

networkFailure NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	ethernetInterface
    }
    STATUS current
    DESCRIPTION
	"A network failure was detected on an ethernet port"
    ::= { remoteKVMDeviceNotifications 26 }
    
-- Start new events defined exclusively for KX2


networkParameterChanged NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	remoteIpAddress,
	oldIpAddress,
	newIpAddress,
	oldNetmask,
	newNetmask,
	newGateway,
	oldGateway
    }
    STATUS current
    DESCRIPTION
	"A network parameter change was detected"
    ::= { remoteKVMDeviceNotifications 27 }

vmImageConnected NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"A Virtual Media Connected"
    ::= { remoteKVMDeviceNotifications 28 }


vmImageDisconnected NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
	"A Virtual Media disconnected"
    ::= { remoteKVMDeviceNotifications 29 }


cimUpdateStarted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance
    }
    STATUS current
    DESCRIPTION
	"CIM update started"
    ::= { remoteKVMDeviceNotifications 30 }


cimUpdateCompleted NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance
    }
    STATUS current
    DESCRIPTION
	"CIM update completed"
    ::= { remoteKVMDeviceNotifications 31 }


cimConnected NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	cimName,
	serialNumber,
	portNumber	
    }
    STATUS current
    DESCRIPTION
	"CIM Connected"
    ::= { remoteKVMDeviceNotifications 32 }


cimDisconnected NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	cimName,
	serialNumber,
	portNumber
    }
    STATUS current
    DESCRIPTION
	"CIM Disconnected"
    ::= { remoteKVMDeviceNotifications 33 }

powerOutletNotification NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	outletName,
	status
    }
    STATUS current
    DESCRIPTION
	"Powerstip-device outlet status Notification"
    ::= { remoteKVMDeviceNotifications 34 }


-- Start new event to support RP products

portConnectionDenied NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	portName
    }
    STATUS current
    DESCRIPTION	
	"A connection to the target port is denied"
    ::= { remoteKVMDeviceNotifications 35 }

-- Firmware file discarded


firmwareFileDiscarded NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName
    }
    STATUS current
    DESCRIPTION	
	"A firmaware file discarded "
    ::= { remoteKVMDeviceNotifications 36 }

firmwareUpdateFailed NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName
    }
    STATUS current
    DESCRIPTION	
    	"A firmware update failed "
    ::= { remoteKVMDeviceNotifications 37 }

firmwareValidationFailed NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName
    }
    STATUS current
    DESCRIPTION	
	"A firmware validation failed "
    ::= { remoteKVMDeviceNotifications 38 }

securityViolation NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
        "Security violation."
    ::= { remoteKVMDeviceNotifications 39 }

deviceUpdateFailed NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName
    }
    STATUS current
    DESCRIPTION
        "Device update has failed."
    ::= { remoteKVMDeviceNotifications 40 }

passwordSettingsChanged NOTIFICATION-TYPE
     OBJECTS {
       rcpObjectName,
       rcpObjectInstance,
       userName,
       status
     }
     STATUS current
     DESCRIPTION
         " Strong password settings changed "
     ::= { remoteKVMDeviceNotifications 41 }

-- Network Failover Trap

ethernetFailover NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	restoredLanPort
    }
    STATUS current
    DESCRIPTION
	"A ethernet failover was detected and restored on new ethernet interface"
    ::= { remoteKVMDeviceNotifications 42 }

-- New traps for KX 1.4.5 Sujata Osowski 01/15/2007

ipConflictDetected NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	rcpIPAddress,
	count
    }
    STATUS current
    DESCRIPTION
        "IP address conflict is detected."
    ::= { remoteKVMDeviceNotifications 43 }

ipConflictResolved NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION
        "IP address conflict is resolved."
    ::= { remoteKVMDeviceNotifications 44 }
    

-- New traps for KSX G2 Prasanna Nageswar 08/14/2007

sxPortAlert NOTIFICATION-TYPE
	OBJECTS {
	    rcpObjectName,
	    rcpObjectInstance,
	    portNumber,
	    sxAlertString
	}
	STATUS current
	DESCRIPTION
		" KSX detected a port alert keyword on a specific port "
	::= { remoteKVMDeviceNotifications 45 }

pduConnected NOTIFICATION-TYPE
	OBJECTS { 
	    rcpObjectName,
	    rcpObjectInstance,
	    portNumber,
	    pduName
	}
	STATUS current
	DESCRIPTION
		" A PDU is connected to the device directly through power port"
	::= { remoteKVMDeviceNotifications 46 }

pduDisconnected NOTIFICATION-TYPE
	OBJECTS {
	    rcpObjectName,
	    rcpObjectInstance,
	    portNumber,
	    pduName
	}
	STATUS current
	DESCRIPTION
		" A PDU is disconnected from a power port"
	::= { remoteKVMDeviceNotifications 47 }

networkParameterChangedv2 NOTIFICATION-TYPE             
      OBJECTS {           
          rcpObjectName,
          rcpObjectInstance,
          userName,
          remoteIpAddress,
          changeEventText
      }
        STATUS              current
        DESCRIPTION         "A network parameter change was detected"
        ::= { remoteKVMDeviceNotifications 48 }

portConnectv2 NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	portName,
	rcpIPAddress
    }
    STATUS current
    DESCRIPTION	
	"A user connected to a port"
    ::= { remoteKVMDeviceNotifications 49 }


portDisconnectv2 NOTIFICATION-TYPE
    OBJECTS {
	rcpObjectName,
	rcpObjectInstance,
	userName,
	portName,
	rcpIPAddress
	}
    STATUS current
    DESCRIPTION	
	"A user disconnected from a port"
    ::= { remoteKVMDeviceNotifications 50 }

userForcedLogout NOTIFICATION-TYPE
    OBJECTS {
   	rcpObjectName,
   	rcpObjectInstance,
   	userName,
   	rcpIPAddress
    	}
    STATUS current
    DESCRIPTION
   	"A user was forcibly logged out by Admin"
    ::= { remoteKVMDeviceNotifications 51 }

userUploadedCertificate NOTIFICATION-TYPE
   OBJECTS {
             rcpObjectName,
             rcpObjectInstance,
             userName,
             rcpIPAddress,
             certificateAuthorityName
           }
   STATUS      current
   DESCRIPTION
     "A user uploaded a SSL Certificate."
   ::= { remoteKVMDeviceNotifications 52 }

bladeChassisCommError NOTIFICATION-TYPE
    OBJECTS {
         rcpObjectName,
         rcpObjectInstance,
         deviceName,
	 portNumber,
         portName 
    }
    STATUS current
    DESCRIPTION
   "A communications error with blade chassis device connected to this port was detected."
    ::= { remoteKVMDeviceNotifications 53 }

setDateTime NOTIFICATION-TYPE
    OBJECTS {
         rcpObjectName,
         rcpObjectInstance,
         deviceName,
         sysDateAndTime
    }
    STATUS current
    DESCRIPTION
   "The device time and date have been set."
    ::= { remoteKVMDeviceNotifications 54 }

setFIPSMode NOTIFICATION-TYPE
    OBJECTS {
         rcpObjectName,
         rcpObjectInstance,
         deviceName,
	 fipsModeStatus 
    }
    STATUS current
    DESCRIPTION
   "FIPS Mode status has been changed on the device."
    ::= { remoteKVMDeviceNotifications 55 }

securityBannerChanged NOTIFICATION-TYPE
    OBJECTS {
         rcpObjectName,
         rcpObjectInstance,
         userName,
         rcpIPAddress,
         bannerChanges
    }
    STATUS current
    DESCRIPTION
   "Security Banner has changed "
    ::= { remoteKVMDeviceNotifications 56 }

securityBannerAction NOTIFICATION-TYPE
    OBJECTS {
         rcpObjectName,
         rcpObjectInstance,
         userName,
         rcpIPAddress,
         bannerAction
    }
    STATUS     current
    DESCRIPTION
   "User Acceptance/Rejection of Security Banner "
    ::= { remoteKVMDeviceNotifications 57 }

scanStarted NOTIFICATION-TYPE
	OBJECTS {
		rcpObjectName,
		rcpObjectInstance,
		userName,
		portList,
		rcpIPAddress
		}
	STATUS current
	DESCRIPTION 
	"A user started a port scan"
	::= { remoteKVMDeviceNotifications 58 }

scanStopped NOTIFICATION-TYPE
	OBJECTS {
		rcpObjectName,
		rcpObjectInstance,
		userName,
		portList,
		rcpIPAddress
	}
	STATUS current
	DESCRIPTION 
	"A user stopped a port scan"
	::= { remoteKVMDeviceNotifications 59 } 


-- *
-- * SNMPv2 Conformance Information *******************************************
-- *

raritanMibConformance   OBJECT IDENTIFIER ::= { raritan 9 }
raritanMibCompliances   OBJECT IDENTIFIER ::= { raritanMibConformance 1 }
raritanMibGroups        OBJECT IDENTIFIER ::= { raritanMibConformance 2 }

raritanMibCompliance    MODULE-COMPLIANCE
    STATUS              current
    DESCRIPTION         "Compliance statement for the private Rariatn MIB."
    MODULE              -- Module Raritan-MIB
    MANDATORY-GROUPS    {
                            raritanMibBasicGroup,
                            raritanMibTrapGroup
                        }
    ::= { raritanMibCompliances 1 }

raritanMibBasicGroup    OBJECT-GROUP
    OBJECTS             {
                            rcpObjectProductVersion, 
                            rcpObjectName, 		
                            rcpObjectInstance,  	
                            userName, 	
                            targetUser, 	
                            groupName,	
                            rcpIPAddress, 	
                            deviceName,	
                            portStatus,		
                            portName,  	
                            clusterID,  	
                            ipPort, 	
                            resetType, 	
                            interface,	
                            ethernetInterface, 	
                            backupRestoreAction,	
                            imageType,		
                            imageVersion,  	
                            status,	
                            fileVersion,	
                            fileType, 	
                            outletName,	
                            portNumber, 	
                            serialNumber,
                            cimName,
                            count,
	restoredLanPort,
	remoteIpAddress, 
	oldIpAddress,
	newIpAddress,
	newNetmask,
	oldNetmask,
	oldGateway,
	newGateway,
	sxAlertString,
	pduName,
                    	changeEventText,
	certificateAuthorityName,
                    	sysDateAndTime,
	fipsModeStatus,
                    	bannerChanges,
                    	bannerAction,
	portList		
			}
    STATUS              current
    DESCRIPTION         "Objects used in the traps."
    ::= { raritanMibGroups 1 }


raritanMibTrapGroup         NOTIFICATION-GROUP
    NOTIFICATIONS       {
                            rebootStarted,		
                            rebootCompleted, 	
                            userLogin, 		
                            userLogout, 		
                            userAuthenticationFailure,  	
                            portConnect, 	
                            portDisconnect, 	
                            userSessionTimeout,	
                            userConnectionLost, 		
                            portStatusChange,
                            userAdded,  	
                            userModified,	
                            userDeleted,	
                            groupAdded, 	
                            groupModified,	
                            groupDeleted, 	
                            startCCManagement,
                            stopCCManagement, 	
                            factoryReset, 
                            deviceUpdateStarted, 
                            deviceUpdateCompleted, 	
                            configBackup, 	
                            configRestore, 	
                            userPasswordChanged, 	
                            powerNotification, 	
                            networkFailure, 	
                            networkParameterChanged, 	
                            vmImageConnected, 	
                            vmImageDisconnected, 	
                            cimUpdateStarted,		
                            cimUpdateCompleted,		 
                            cimConnected,  		
                            cimDisconnected,	
                            powerOutletNotification,
                            portConnectionDenied, 	
                            firmwareFileDiscarded, 	
                            firmwareUpdateFailed, 	
                            firmwareValidationFailed, 	
                            securityViolation, 	
                            deviceUpdateFailed,		
                            passwordSettingsChanged,		 
                            ethernetFailover, 
                            ipConflictDetected,
                            ipConflictResolved,
                            sxPortAlert,
                            pduConnected,
                            pduDisconnected,
                            networkParameterChangedv2,
                            portConnectv2,
                            portDisconnectv2,
                            userForcedLogout,
	userUploadedCertificate,
 	bladeChassisCommError,
                            setDateTime,
	setFIPSMode,
                            securityBannerChanged,
                            securityBannerAction,
	scanStarted,
	scanStopped
                        }
    STATUS              current
    DESCRIPTION         "Raritan traps."
    ::= { raritanMibGroups 2 }


END